03-Serie TG-A 03-Serie TG-A 06/11/14 13:56 Page5 TG series Tiny slide switches Overview and specifications UG1410A Sealed Single piece case Epoxy sealed terminals Wide variety of contact materials Same PCB layout as TL, TP and TR tiny series SPECIFICATIONS MATERIALS Current/voltage rating with resistive load : Case : flame retardant - Gold plated contacts : 0,4VA 20V max. AC or DC. thermoplastic - Silver plated contacts : 0,5A 48V max. AC or DC Actuator : thermoplastic Contact resistance : 20 m max. Ground plate and bracket : Insulation resistance : 1.000 M min. at 500VDC brass, tin plated Dielectric strength : 1.000 Vrms 50 Hz min. between terminals and frame Contacts and terminals : 500 Vrms 50 Hz min. between terminals see above Electrical life at full load : 2 position switches : 60.000 cycles Rubber seal : silicone, transparent 3 position switches : 30.000 cycles Terminal seal : epoxy Travel : 2,60 mm (.102) Operating temperature : -30C to +85C Cleaning : solvents or water + detergent Wave soldering : 260C - 5 sec. max. TG E SERIES Number of poles Electrical functions Terminals 3 Single pole 6 ON - ON P0 Straight PC 9 ON OFF ON Y0 Straight PC, bracket mounting W0 Right angle, horizontal mounting MW Wire-wrap Contact and terminal Actuators Model materials 00 High (standard) 00 Standard 0 Brass, gold plated (std) 10 Flush 50 Washable 1 Brass, silver plated 3 Brass, gold plated (1,27 gold) 8 Contact brass, gold plated + tin plated terminals 9 Contact brass, gold plated (1,27 gold) + tin plated term. Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. Packaging unit : 100 pieces, except for models with right angle terminals (50 pieces) The company reserves the right to change specifications without notice. APEM www.apem.com E-503-Serie TG-A 03-Serie TG-A 06/11/14 13:56 Page6 TG series Tiny slide switches Standard or washable Straight PC, right angle or wire-wrap terminals Single pole The silicone rubber seal can be removed after cleaning. Y0WP00 To complete the following part numbers, refer toOvervie and replace the symbol with one of the options proposed underContact and terminal material. Straight PC terminals - standard model 2.50 2.50 (.098) (.098) 0.50 (.019) 0.70 TG36P00000 ON - ON (.027) 2.54 2.54 TG39P00000 ON OFF ON (.100) (.100) 1.10 (.043 DIA) 10.10 (.397) 2.54 2.54 (.100) (.100) E 5.80 3.20 Straight PC terminals - washable model (.228) (.125) 2.50 2.50 (.098) (.098) 0.50 TG36P00050 ON - ON (.019) 0.70 (.027) TG39P00050 ON OFF ON 2.54 2.54 (.100) (.100) 1.10 (.043 DIA) 10.10 (.397) 2.54 2.54 (.100) (.100) 2.50 2.50 Straight terminals - bracket mounting - standard model (.098) (.098) 0.50 (.019) 0.70 (.027) 2.54 2.54 TG36Y00000 ON - ON (.100) (.100) TG39Y00000 ON OFF ON 2.54 10.16 (.400) (.100) 2.54 1.10 (.100) (.043 DIA) 2.54 2.54 (.100) (.100) 11.10 (.437) E-6 www.apem.com APEM 9.60 3.00 12.60 (.378) (.118) 9.60 3.00 9.10 3.50 (.496) (.378) (.358) (.118) (.137) 2.65 1.00 9.60 (.104) (.039) 1.00 1.00 (.377) (.039) (.039) 12.60 5.00 5.00 (.496) (.196) 4.30 (.196) 5.00 (.169) (.196) 9.10 (.358) 5.55 (.218) 3.30 3.30 (.129) (.129) 3.30 (.129) 3.05 (.120)