Evaluation Module Series The A1101R04C-EM1 is a high-performance, interface board with an ETSI- compliant A1101R04C connectorized radio module mounted for quick connection to the Texas Instruments CC1101DK Development Kit. A1101R04C-EM1 Product Overview The A1101R04C-EM1 is an evaluation module The A1101R04C has an RoHS-compliant ENIG with an Anaren A1101R04C radio module in the finish and is packaged on tape & reel or in matrix industrys smallest package (9 x 12 x 2.5mm) tray for high-volume automated manufacturing. mounted on it. This evaluation module is designed specifically for compatibility with SmartRF 04, SmartRF 05 and MAVRK evaluation boards. Each Anaren A1101R04C module incorporates the Texas Instruments CC1101 transceiver chip. As a stand-alone module for your final design implementation, Anarens A1101R04C has an LGA pad footprint with an industry-standard U.FL button connector receptacle. This module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. Layout Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / Nomenclature Pin Diagram Development Kit Connectors A (Anaren) 1 Chip series (CC1101, CC110L, CC2500) 2 Function (R = radio only) 3 Frequency band (x100MHz) 4 Form factor (A = Internal Antenna, C = Connector) 5 Module Type (EM1 = Eval Module, EZ4x = EZ-430 Module, LPF = BoosterPack) Connector P1 Connector P2 To view the entire available family of AIR Modules & Pin 1 GND Pin 1 NC Development options, please visit our website at: Pin 2 NC Pin 2 GND Pin 3 NC Pin 3 NC