Multi-Protocol USB Host Adapter Datasheet Revision 1.2 Multi-Protocol USB Host Adapter Product Datasheet Revision 1.2 June 23, 2019 Binho, LLC 446 Old County Road STE 100-320 Pacifica, CA 94044 Multi-Protocol USB Host Adapter Datasheet Revision 1.2 The Binho Multi-Protocol USB Host Adapter 1 Key Features features 5 signal pins, 1 x 3v3 pin, 1 x V pin, USB Support for SPI 12MHz max clock and 3 x GND pins on its 10pin wire harness. The Support for I2C 3.4MHz max clock wire harness terminates with a female 1.27mm Support for UART 1000000 max baud 2x5 IDC connector. In IO Mode, the 5 signal pins Support for Dallas 1-Wire can be used for varying functions such as Digital Support for Atmel Single-Wire Interface Input, Digital Output, PWM Output, Digital Provides 3v3 and V power rails USB Interrupt (on rising edge, falling edge, or 1 x DAC Output, 5 x ADC Inputs change), Analog Input, or Analog Output. GPIO / Interrupt / PWM Support Programmable RGB Status LED Additionally, the host adapter is able to utilize Field-Upgradeable Device Firmware these pins to communicate on several digital Cross-platform Support for Windows, buses: I2C, SPI, UART, (Dallas)1-Wire, and Mac, Linux (Atmel) Single-Wire Interface. While in these Robust, low-profile Aluminum modes of operation, remaining available pins Enclosure can be assigned to other related or unrelated USB Type-C Connector purposes such as gpio, interrupts, chip selects, PWM signals, or analog input or outputs. 2 Applications Firmware Development The Binho Multi-Protocol USB Host Adapter is Proof of Concept Development ideal for manual testing during firmware System Debugging development and debugging as well as a perfect Automated Hardware Testing way to automate hardware testing and Automated Firmware Testing validation. A common use-case of this product EEPROM Programming in production environments is for FLASH Programming EEPROM/Flash Memory programming along FRAM Programming with functional testing activities. 3 Description 4 Included Components The Binho Multi-Protocol USB Host Adapter The Binho Multi-Protocol USB Host Adapter allows one to interface their computer directly comes along with a Breadboard Breakout to hardware circuits. This device is powered by Adapter and 1 foot USB type C (male) to type A the USB connection to the host PC and is also (male) cable in a soft-shell zippered case. able to provide downstream power to test circuits. Website: