Product Information

410-081

410-081 electronic component of Digilent

Datasheet
Test Plugs & Test Jacks PmodTPH 6-pin test Point Header

Manufacturer: Digilent
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (AUD)

1: AUD 16.5 ( AUD 18.15 Inc GST) ea
Line Total: AUD 16.5 ( AUD 18.15 Inc GST)

30 - Global Stock
Ships to you between
Thu. 18 Jul to Mon. 22 Jul
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
1 - Global Stock


Ships to you between Thu. 18 Jul to Mon. 22 Jul

MOQ : 1
Multiples : 1

Stock Image

410-081
Digilent

1 : AUD 11.5

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Type
Connection Method
Length
Mounting Angle
Number Of Positions
Packaging
Product
Series
Width
Brand
Factory Pack Quantity :
Cnhts
Hts Code
Mxhts
Product Type
Subcategory
Taric
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.

1300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com PmodTPH Reference Manual Revised April 12, 2016 This manual applies to the PmodTPH rev. C Overview The Digilent PmodTPH offers 6 external pin headers so that users can easily test the signals passing through each of the pins. Features include: 6 external test point headers Easily access and test signals passing through Small PCB size for flexible designs 1.0 in 0.8 in (2.5 cm 2.0 cm) 6-pin Pmod port with GPIO interface Follows Digilent Pmod Interface Specification Type 1 The PmodTPH. 1 Functional Description The PmodTPH is a great way for users to get easy access to signals coming in and out of the system board by acting as an intermediate between the system board and the peripheral component. 2 Interfacing with the Pmod The PmodTPH is a pass through module, making it essentially equivalent to a set of six wires coming from the system board with center taps that users can attach their multimeter probes to. Consequently, there is no particular protocol that is associated directly with this Pmod. Copyright Digilent, Inc. All rights reserved. DOC : 502-081 Page 1 of 2 Other product and company names mentioned may be trademarks of their respective owners. PmodTPH Reference Manual Pin Signal Description 1 P1 Signal 1 P1 P1 2 P2 Signal 2 3 P3 Signal 3 P2 P2 4 P4 Signal 4 5 GND Power Supply Ground P3 P3 6 VCC Positive Power Supply Table 1. Pinout description table. P4 P4 GND GND Vcc Vcc Figure 1. Test point header diagram. As there are no integrated circuits on this Pmod, any external power that is usable with the system board can be applied to the PmodTPH. 3 Physical Dimensions The pins on the pin header are spaced 100 mil apart. The PCB is 1 inch long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header. Copyright Digilent, Inc. All rights reserved. Page 2 of 2 Other product and company names mentioned may be trademarks of their respective owners. J1 Connector J2 Test Point Header J3 Connector

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted