109060021

DSCope U3P100 USB-based Digital Oscilloscope Key Features H: 16mm 2 analog channels USB 3.0 interface CH0 100MHz bandwidth Up to 1GSa/s sample rate CH1 Up to 2Gbits hardware memory Ultra-portable size Unibody aluminum case L: 115mm 3-year warranty Connectivity Main Type-C USB 3.0 interface Auxiliary Type-C USB interface BNC connectors (Standard Probe Interface) Extension interface (Pogo Pin Connector) Power Source Power source voltage: 5V 5% DC Power consumption: 4W maximum Input output ports Direction Descriptions Protected Voltage Range Main USB 3.0 data port InOut Connect to host computer 4.75v ~ 5.25v Auxiliary USB power port Input Auxiliary power 4.5v ~ 5.5v BNC connectors Input Connect to probes -100v ~ +100v (DC+AC) Extension interface InOut Extension probes and module 0-3.3v Probe compensator Output 3v // ~1KHz square wave -- Designed to make your work enjoyable DSCope U3P100 is a USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 1GSa/s sample rate, USB 3.0 interface). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime. 1 www.dreamsourcelab.com W: 74mmDSCope U3P100 Datasheet Technical Specifications Vertical system Analog Bandwidth: 100MHz Input coupling: DC or AC Input impedance: 1M // ~16pF Input sensitivity range: 10mV/Div to 2V/Div Vertical resolution: 8bits Maximum input voltage: peaks 100V DC gain accuracy: 6% Vertical position range: 5 divisions Vertical offset ranges: Volts/Div setting Offset rang 10mV/Div ~ 2V/Div 100mV ~ 20V/Div Common mode rejection ratio(CMRR): -- Channel-to-channel isolation: -- Horizontal system Maximum sample rate (single channel) 1GSa/s Maximum sample rate (dual channel) 500MSa/s Time base range: 2ns/Div to 10s/Div Maximum duration of time 2ms (real-time capture) captured at highest sample rate (all channels): 200ms (single capture) Record Length (real-time capture): 1M (dual channel) 2M (single channel) Record Length (single capture): 128M (dual channel) 256M (single channel) Trigger system Trigger mode: Auto Normal (ch0, ch1, ch0 & ch1, ch0 ch1) Trigger position range: 1% ~ 99% of record length Trigger holdoff range: 1 us ~ 10 s Trigger types: Edge (rising or falling) Sensitivity: 0 ~ 0.625 vertical division Trigger level ranges: 4.4 vertical division from center screen Waveform measurements Cursors: Horizontal Width/Frequency/Period/Duty Vertical Amplitude Automated measurements: Frequency / Period / +Duty /- Duty / +Count Rise / Fall / +Width / -Width / BrstW Amplitude / High / Low / RMS / Mean Pk-Pk / Max / Min / +Over / -OVer www.dreamsourcelab.com 2