ECMF02-2AMX6 Common mode filter with ESD protection for USB 2.0 and MIPI D-PHY/MDDI interface Datasheet - production data Applications Mobile phones Notebook, laptop Portable devices PND Description The device is a highly integrated common mode filter designed to suppress EMI/RFI common mode noise on high speed differential serial QFN-6L buses like MIPI D-PHY, MDDI or USB 2.0. Also it can protect and filter one differential lane. Figure 1: Pin configuration Features High common mode attenuation: -34 dB at 900 MHz D+ D+ -20 dB between 800 MHz and 2.2 GHz ESD ESD Large bandwidth: 1.7 GHz Very low PCB space consumption Thin package: 0.55 mm max. D- D- RoHS package ESD ESD High reduction of parasitic elements through integration GND NC Complies with the following standards IEC 61000-4-2 (exceeds level 4) 15 kV (air discharge) 8 kV (contact discharge) March 2017 DocID17815 Rev 3 1/13 www.st.com This is information on a product in full production. Characteristics ECMF02-2AMX6 1 Characteristics Table 1: Absolute maximum ratings (Tamb = 25 C) Symbol Parameter Value Unit IEC 61000-4-2: 8 VPP Peak pulse voltage Contact discharge kV 20 Air discharge I Maximum DC current 200 mA DC Tj Maximum junction temperature range -55 to +125 T Storage temperature range -55 to +150 C stg TL Maximum temperature for soldering during 10 s 260 Figure 2: Electrical characteristics (definitions) Table 2: Electrical characteristics (T = 25 C) amb Symbol Test condition Min. Typ. Max. Unit V I = 1 mA 6 V BR R IRM VRM = 1.5 V per line 100 nA R DC serial resistance 1.8 2.5 DC Compliant with USB 2.0 high speed sync field test (150 mV diff). 2/13 DocID17815 Rev 3